Imitha ye-oyile ye-Oval ye-Oval ye-elektroniki i-OGM-15E Mechanical Oval imitha yegiya yeoyile OGM-15M

Imitha ye-oyile ye-Oval ye-Oval ye-elektroniki i-OGM-15E Mechanical Oval imitha yegiya yeoyile OGM-15M

Inkcazo

Electronic Oval gear imitha yeoli OGM-15E
Mechanical Oval gear imitha yeoli OGM-15M

Imitha yegiya ye-oval ye-elektroniki ye-Koeo OGM-15E, eyilelwe ukulinganisa ioyile yokuthambisa.Isantya sokuhamba ukuya kuthi ga kwi-30L / min.Ukufundwa ngokuchanekileyo ukuya +/- 0.5% kunye noxinzelelo oluphezulu kwi-70Bar.Ifanelekile ukubeka iliso ukuhanjiswa kweoli kunye noluhlu olubanzi lwe-viscosity.Imitha ixhotyiswe ngomboniso wedijithali kwaye iyafumaneka nakwinguqulo ye-pulser.Ingasetyenziswa nge-oyile ye-Koeo ye-K400.

Ezona mpawu

● Umboniso weDijithali ubonisa zombini umlinganiselo osetyenzisiweyo kunye nongenakusetwa kwakhona
● Izinga lokuhamba ukuya kuthi ga kwi-30LPM
● Ukufunda ngokuchanekileyo ukuya +/-0.5% kunye noxinzelelo oluphezulu kwi-70Bar
● Ibhetshi enamanani ama-5 ekwazi ukusetwa kwakhona, inamanani ama-6 angaphindi asetyenziselwe a accumulative totalize.

Iinkcukacha zobugcisa

Inombolo yoMzekelo	OGM-15E	Ubushushu bokusebenza:	-10°C (14°F) ukuya +50°C (122°F)
Uluhlu lokuhamba	1-30 L/min(0.26-7.93USgal/min)	Ukuchaneka	+/- 0.5%
Uxinzelelo olukhulu	70 Bar/1000PSI	Ukuphindaphinda	+/- 0.3%
Viscosity	2 - 2000 cSt	Ubunzima	500g (1.10lbs)
Umsonto woQhagamshelwano	1/2” BSPP(F) /BSPT(F) okanye I-NPT (F)	Izinto eziphathekayo	Umzimba: IiGears zeAluminiyam: Ipolymer yeTechno

Ukhetho

Umsonto:□1/2” BSPP (F)□1/2” BSPT (F)□1/2” NPT (F)

Imitha yegiya ye-Koeo oval OGM-15M enerejista yoomatshini eyilelwe ukulinganisa ioyile yokuthambisa.Isantya sokuhamba ukuya kuthi ga kwi-30L / min.Ukufundwa ngokuchanekileyo ukuya +/- 1.0% kunye noxinzelelo oluphezulu kwi-70Bar.IRejista yoomatshini inee-resettable ezingenakuphinda zisetwe kunye ne-push-button, zifanelekile kuzo zonke izicelo ze-line kunye ne-end-of-line.Ifanelekile kwi-oyile ye-oyile ye-oyile, i-oyile yegiya, i-oyile ye-hydraulic yokupholisa, idizili, i-kerosene.Ingasetyenziswa nge-oyile ye-Koeo ye-K400

Ezona mpawu

● Umboniso woomatshini obonisa zombini ezongezelekayo & neqhosha-liqhosha lokuseta ngokutsha iitotali zeebhetshi
● Izinga lokuhamba ukuya kuthi ga kwi-30LPM
● Ukufunda ngokuchanekileyo ukuya +/-1.0% kunye noxinzelelo oluphezulu kwi-70Bar
● Ibhetshi enamanani ama-4 ekwazi ukusetwa kwakhona, inani elinamanani asi-7 elingasetwa ngokutsha.

Iinkcukacha zobugcisa

Inombolo yoMzekelo	OGM-15M	Ubushushu bokusebenza	-10°C (14°F) ukuya +55°C (131°F)
Flow Range	1-30 L/min(0.26-7.93USgal/min)	Ukuchaneka	+/-1.0%
Uxinzelelo olukhulu	70 ibha/1000 psi	Ukuphindaphinda	+/- 0.3%
Viscosity	2 - 2000 cSt	Ubunzima	490g (1.08lbs)
Umsonto woQhagamshelwano	1/2” BSPP(F) /BSPT(F) okanye iNPT (F)	Izinto eziphathekayo	I-acetal, i-aluminiyam, i-nitrile (NBR), intsimbi ethambileyo

Ukhetho

I.Iyunithi:□IGallon□Ilitha

II.Umsonto:□1/2” BSPP (F)□1/2” BSPT (F)□1/2” NPT (F)

Thumela uMbuzo

Iimveliso ezifanayo

I-K24 IMETHA YOKUHAMBA KWE turbine

Imitha yokuHamba yeTurbine

idizili, i-biodiesel, i-kerosene, i-petroli, i-adblue, amanzi;
Imibala emi-2 yokhetho.

Izinto zomzimbaiplastiki

Ukuchaneka±1%

I-TEM Uthotho lweeMITA YOKUHAMBA KWE turbine

Imitha yokuHamba yeTurbine

idizili, ipetroli

Izinto zomzimbaaluminiyam

Ukuchaneka±1%